Black Plastic Push To Connect Fittings 1/2”” x 1/4”” x 1/2 Inch Tube OD Tee Reducer Connector Push Fit Fittings PGT1/2-1/4(Pack of 5)

Product Description :

Range of application： 1.
Working Medium:Compressed Air(Not other gas or liquid) 2.
Working Pressure:0~150 PSI / 0~9.
9kgf/cm2(0~990 kPa) 3.
Negative Pressure:-29.
5 in Hg/ -750mm Hg(-750 Torr) 4.
Working Temperature:32~160 °F / 0~70°C 5.
Application of Trachea:PU/PE/PA/PVC/Nylon/PTFE Notice: 1.
Removal the dust and impurity after install tracheal.
2.
Pipe fittings products use for smooth conveying air, avoid using them for other purposes.
3.
In accordance correctly with torque equipment the pipe fittings, the pressure is too large may damage the thread, the correct torque is use tool rotation 2~3 turn.
4.
Insert the trachea into the fittings, with the right angle shear trachea, and then insert the trachea to end, and gently pulling out the tracheal, ensure that the trachea can not fall off 5.
Ensure that the trachea is tension states, at the same time to avoid into the connector at the connecting end the pipe is too bend 6.
If there are unclear parameters or technical problems, you can consult before placing an order, so that you can use it correctly.
Warning： 1.
Do not use other fluid, except of the air and water.
2.
Do not use in vibration, shock, rotating and bending over the place.
3.
To prevent torsion, stretching and bending pipe joint products resulting in increased pressure, which may cause product damage or leakage.
4.
When the fluid is water, please use the complies with all standard requirements products, otherwise may cause the pipe joint damage, leakage and unknown security Hidden.

Product Details :